Prepare everything you need. Prepare all images or letters or other things for lamination. Also prepare your scissors and / or cutter, which you will use to cut the excess in laminated work.
If you want to apply the design to the objects that you are going to laminate, such as images, do it now before you laminate. You can also use creative cuts in your work (for example, zigzags or curved cuts), but this is not recommended for images, it is better to leave them as they are.
Turn on the machine. If the machine refuses to work, check if it is in standby mode, as some machines have this mode of operation.
Wait for the machine to warm up. Heating time varies depending on the machine unit; Some can last from 5 to 10 minutes, some even up to 15 minutes.
Laminators usually have an indicator that tells you when you can start rolling. By then, you can insert the laminated bags and the item you want to laminate.
Press the “Run” button, and when the finished product is ready, click the “Stop” button and enter the next element into the tail of the laminating machine singapore.
Remember to laminate thick objects, such as cardboard and folders, at a lower speed so that the machine can effectively laminate them, while thin objects such as images, letters and paper are made at high speed.
Do not rush to laminate, do not rush. We all want to avoid bubbles and remember that, once our image is already layered, we cannot cancel it without damaging the image or our other work. Therefore, do not forget to be careful.